Metal lathe tools

Collection by Lodewyk Christiaan • Last updated 10 weeks ago

309 
Pins
 • 
107 
Followers
Lodewyk Christiaan
Custom metal

Custom metal

Radius Turning Tool by Iliketobuild — In the process of building a boat I ran into a problem which required the fabrication of a new tool. The rub rails for the boat are schedule 40 aluminum pipe 2 in diameter. They require significant bending along a

Ring Rollers

In the process of building a boat I ran into a problem which required the fabrication of a new tool. The rub rails for the boat are schedule 40

 Allow yourself lots of time to work on crafts and arts project. Good quality may come from the time as well as focus on the job. So make some time to you'll really start to see the difference. Metal Working Tools, Old Tools, Metal Mill, Metal Processing, Machinist Tools, 3d Cnc, Ideas Prácticas, Lathe Tools, Milling Machine

Homemade Milling Machine Plans Turkey, Homemade Milling Machine

Homemade Milling Machine Plans Manufacturers Turkey, Turkish Homemade Milling Machine Plans Manufacturers, Companies, Suppliers List Directory Turkey.

Lathe Ball Turning Attachment - Homemade lathe ball turning attachment fabricated from

Lathe ball turning attachment.

Lathe ball turning attachment. - Pirate4x4.Com : 4x4 and Off-Road Forum

Homemade tool post attachment for a high speed rotary tool Metal Lathe Tools, Metal Lathe Projects, Metal Working Tools, Homemade Lathe, Homemade Tools, Lathe Accessories, Machinist Tools, Metal Workshop, Lathe Machine

Homemade Tool Post Attachment for a High-Speed Rotary Tool

Homemade toolpost attachment for a high-speed rotary tool. Fashioned from two sections of 1/2

Metal working ideas: Organize your crafts and arts space by the type of project you usually make.You need to save you enough time.

Flycutters and brazed carbide.

What type of brazed carbide tool should I buy to mount in a flycutter? as in AL or BL style? http://www.use-enco.com/CGI/INPDFF?PMPAGE=169&PARTPG=INLMK32 My flycutters hold the bit at 20 degrees offset. Any modifications I should do to the tool form? And what carbide grade is recommended for descaleing hot rolled steel? (as in C2 C5 C6) Does having a 45 degree lead angle help or hurt when descaleing hot rolled steel?

3 Jaw Chuck Spacer by DeusExMachinist Metal Lathe Tools, Metal Lathe Projects, Router Projects, Blacksmith Tools, Metal Working Tools, Metal Bender, Milling Machine, Homemade Tools, Metal Fabrication

3 jaw chuck spacers

Here's a couple of spacers/parallels I made for the 3-jaw. Much more convenient than using 3 hands to hold a conventional parallel in place, and you

Lathe chuck spider in metal and plastic Metal Lathe Tools, Metal Lathe Projects, Homemade Lathe, Lathe Chuck, Machinist Tools, Industrial Machine, Diy Cnc, Tool Shop, Work Tools

Lathe chuck spider in metal and plastic

Chuck spider, Sherline chuck spider, plastic chuck spider, Mowrer WW lathe tools, rapid prototype chuck spider, watchmakers lathe chuck spider

Home made workshop tools - Page 14 - The Jockey Journal Board

Home made workshop tools - Page 14

Homemade chuck spider

Homemade tool center height gauge comprised of a cone head threaded onto a brass base.

Homemade Tool Center Height Gauge

Homemade tool center height gauge comprised of a cone head threaded onto a brass base.

No argument when it comes to boring heads the way to go is with a dovetailed slide with index-able adjustment screw. But not everyone can afford to Metal Lathe Tools, Tool Room, Industrial Machine, Turning Tools, Machine Tools, Steam Engine, Different Styles, Metal Working, Things To Come

A different style boring head

No argument when it comes to boring heads the way to go is with a dovetailed slide with index-able adjustment screw. But not everyone can afford to