Skip to content
Explore
Shop
Search for easy dinners, fashion, etc.
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Right Angle Coupler 48x60mm | bol | Lijstjes
Explore
Home Decor
Home Maintenance
Suitable for scaffold tube combination Ø 48 / 60 mmCorrugated typeWelded-on bolt M14 x 50 mmAccording to EN74Coupler: Galvanized steelCollar nut: AF 22, galvanized steelT-Bolt: Metric thread, galvanized steel Right angled couplers / Clamps for scaffolding tubes 48x60 mm, EN 74B, Hot dip galvanizedOur normal coupling connect two scaffolding pipes at 90° angle to each other. They are used as a rigid connection of scaffolding tubes, or in combination with our scaffolding anchors to attach the scaffolding to the wall.The hammer head screw is 82 mm long and the fret nut has a spanner width of 22. The material of the hammer head screw and fret nut is yellow galvanised steel.The scaffolding clamps have a diameter of 48 mm and are therefore suitable for all scaffolding with a tube diameter of 4.83 Hammer Head, Hot Dip, Scaffolding, Right Angle, Galvanized Steel, The Wall
bol.com

Right Angle Coupler 48x60mm

Suitable for scaffold tube combination Ø 48 / 60 mmCorrugated typeWelded-on bolt M14 x 50 mmAccording to EN74Coupler: Galvanized steelCollar nut: AF 22, galvanized steelT-Bolt: Metric thread, galvanized steel Right angled couplers / Clamps for scaffolding tubes 48x60 mm, EN 74B, Hot dip galvanizedOur normal coupling connect two scaffolding pipes at 90° angle to each other. They are used as a rigid connection of scaffolding tubes, or in combination with our scaffolding anchors to attach the…
bol
bol
126.9k followers

Comments